Ottawa Forklift Training Schools - Have A Safe And Efficient Work Place With Our Forklift Training Schools
Are you looking for work as a forklift driver? Our regulatory-compliant mobile equipment operator training provides instruction in kinds of lift trucks, pre-shift check, fuel kinds and dealing with fuels, and safe utilization of a lift truck. Practical, hands-on training assists people participating in acquiring basic operational skills. Course content includes current rules governing the operation of forklifts. Our proven forklift courses are designed to offer training on these types of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.
Whilst the lift truck is in operation, do not raise or lower the forks. Loads should not extend above the backrest. This is because of the risk of the load sliding back in the direction of the operator. Inspect for overhead obstructions and ensure there is sufficient clearance prior to lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it slightly back.
While the load is raised the forklift would be less steady. Make certain that no pedestrians cross underneath the elevated fork. The operator should never leave the lift truck while the load is lifted.
The forks must be level when handling pallets, and high enough to extend all the way into and underneath the load. The width of the forks should provide equal distribution of weight.
Prior to loading or unloading the truck, set the brakes and chock the wheels. Floors must be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed to support a semi-trailer which is not coupled to a tractor. The height of the entrance door must clear the height of the forklift by at least 5 cm. Mark edges of ramps, docks or rail cars and avoid them.