Ottawa Overhead Crane Operator Training

Ottawa Overhead Crane Operator Training - The course teaching overhead crane operator training has been designed particularly to instruct trainees on the fundamentals of pre-shift inspections and overhead crane/sling operation. The programs are instructed by professional trainers and consultants. Well-trained employees are more efficient and productive, that actually saves on costs connected with property damage, product damage, and accidents because of the utilization of incorrect operating procedures. Our overhead crane certification is customized for employees who have literacy barriers, reducing certification time by 50 percent.

Overhead cranes are best for specific repetitive lifting activities. This kind of crane has wide ranging capacities. They can be utilized for specialized hoisting jobs like for example installing or removing major plant machines.

To safely operate an overhead crane, workers have to employ safe rigging practices. This needs both practice and knowledge. The load must be rigged right in order to ensure its stability when hoisted. Prior to starting a hoisting job, it should be determined that the crane is suitable for the job, with correct lift, capacity and travel. The crane needs to be subjected to a thorough physical and visual inspection before utilization. The capacity of all machines, including the hardware, rope and slings, must never go over load weight capacities.

The rigger must know the right sling for each and every lift and inspect slings and other rigging hardware before utilizing. Clear signals must be utilized in communications with the crane operator. A signaler has to be chosen for the role and signals should be agreed upon. The operator of the crane has to follow instructions from the chosen person only. If a remote or wired controller is being used, the operator must be trained in all its functions.

In order to ensure the safety of workers, a warning should be issued and the path of the load should be cleared of all obstacles before the lift starts. Individuals should not be allowed to walk under the lift loads. The crane hoist has to be centered over the load before lifting to prevent swinging. The safety catch needs to be closed instantly after sliding the sling fully onto the lifting hook. Unused sling legs should be secured so they do not drag. Never leave loose materials on a load being hoisted. Watch that hands and fingers are clear when slack is taken out of a sling. Step clear of the danger zone before the lift is made.

Click to Download the pdf